air hoist

Driving a pneumatic lifts is compressed air and moving motors are driven by a wind mechanism.

Wind lifts are usually used in spark-sensitive environments. Advantages of windshields. Lower weight lifters and faster operation, easier maintenance and no risk of electric shock for the user in wet areas.
Function in different weather conditions (corrosive atmospheres, chemical, wet, very hot and very cold, etc.)

Product catalog

air hoist

Other types of lifters, pneumatic lifters or pneumatic booms can be loaded with compressed air. The crane or lift system is made up of parts such as air supply, filter, dryer, drainage pipes, hoses and fittings.

In short, compressed air is provided by a compressor with a pressure and discharge proportional to the lift capacity, and after passing filters, particles and impurities such as dust are taken. The size of the particles in the air entering the pneumatic lift system should not be greater than 5 microns. Then the cleaned air is used to dehumidify and prevent the corrosion of the lift system into the drying stage. At this stage, after complete removal of moisture and water, suitable air is supplied by pipes, hoses and fittings to the lift or crane system. To remove water and humidity from the air, the drainage pipes are installed in the air supply and in the transmission path.


first known construction cranes were invented by the Ancient Greeks

[ess_grid alias=”projects-3″]